About Us

Products

• MAH graft

  • POE-g-MAH

    W1A/ POE-g-MAH serious maleic anhydride grafted POE used as compatibilizer coupling agent for Polyamides/ Nylon/PA glass fiber

    PA reinforced filled ultra-low temperature toughened POE-g-MAH with FDA,ROHS,SVHC,TSCA, REACH

    PA Reinforced Filling Ultra-low Temperature Toughening High Grafting Rate POE-g-MAH Compatible Toughening Agent

    POE-g-MAH white or light yellow uniform particle polymer nylon-50℃ ultra-low temperature toughening compatibility modifier

    W1 ethylene elastomer with functionalized maleic anhydride, which is especially suitable for super-tough or cold-resistant nylon

    PA Reinforced Filling Ultra-low Temperature Toughening High Grafting Rate POE-g-MAH Compatible Toughening Agent

    Polyolefin Elastomer Grafting Maleic Anhydride Plastic Auxiliary Agent for PA6 or PA66 Compatibilizing or Toughening pictures & photos Polyolefin Elastomer Grafting Maleic Anhydride Plastic Auxiliary Agent for PA6 or PA66 Compatibilizing or Toughening

    Modifier for Increasing The Impact Resistance and Processability of Nylon

    Low temperature resistant nylon toughener (W1A)

    Nylon Toughener

    Ultra-low temperature nylon toughener W1B

    White and Transparent Particle High Polymer Compatibility Agent for Nylon and Glass Fiber

    Poe Grafted Maleic Anhydride Series Products as Plastic Additives Used in Nylon Processing/Reducing Water Absorption

    Impact Modifier Used in PA6/PA66 Modification of Toughness and Compatibility

    Maleic anhydride functionalized polyolefin elastomer

    W1A-2

    PA/PA6/PA66 Reinforcing and Tougnhening Compatibilizer

    A maleic anhydride functionalized polyolefin elastomer

    W1T impact modifier/ compatibilizers to improve the compatibility between polyamide and polypropylene, or polyethylene.

    W1E used as impact modifier/compatibilizer for PA6, PA66, and polyamide base fire retardant compounds masterbatch.

    Coace® W1C-2 Polyolefin copolymer grafted maleic anhydride used as impact modifiers for PA6, PA66

    W1C POE grafted maleic anhydride used as compatibilizer/impact modifier in PP/PA/PE

    Modifier for Increasing The Impact Resistance and Processability of Nylon

    W1F-3 used as impact modifiers for PA6, PA66, and polyamide base fire retardant compounds masterbatch.

    Impact modifiers for PA6, PA66, and polyamide base fire retardant compounds masterbatch

  • PP-g-MAH

    Translucent white granules particles anhydride modified polypropylene with lower odor modifiers coupling agent for PP/GF composite compounds

    Chemically functionalized polypropylene with high content of maleic anhydride increase adhesive properties for multiple fillers

    Polypopylene Wood-Plastic Composite Coupling Agent

    High melting point PP compatibilizer

    Polypropylene Grafted Maleic Anhydride Modifier Used in Enhancing Compatibility of PA/PP or PA/PE Alloy

    Platic modifier about B2 specification introduce

    Polypropylene compatibilizer (B1)

    Polypropylene grafting maleic anhydride plastic compatibilizer

    coupling agent/compatibilizers used to strengthen the adhesion between PA and PP/ infill materials and polymer matrix.

    Polypropylene Wood-Plastic Composite and Nylon and Polyolefin Alloy Compatible Agent

    B1C

    B1F

    B1-1

    B1-2

    B1R

    Improve the compatibility between polyamide and polypropylene.

    A maleic anhydride functionalized high molecular weightpolypropylene

    B1P maleic anhydride modified polypropylene with low melting point and high grafting rate.

    A kind of chemical functionalized propylene base copolymer K3B

  • PE-g-MAH

    Universal HDPE-G-MAH, compatibilizer for polyolefin materials

    Maleic anhydride modified linear low density polyethylene polyolefin alloy compatibilizer low smoke halogen free flame retardant W1L

    cable material compatibilizer

    Anti-corrosion pipe compatibilizer W1L-1

    Toughening Agent Used in Low-Smoke Halogen-Free Flame Retardant Cable Materials

    PE-g-MAH Low Smoke Halogen Free Flame Retardant Cable Material: W1L

    Coupling Agent for Low-Smoke Halogen-Free Flame Retardant Cable Materials

    HDPE grafted maleic anhydride (W1H)

    Polyethylene Grafted Maleic Anhydride Used as Chemical Additives for Masterbatches with PE

    W1L-5 as compatibilizer for polyamide and polypropylene, or polyethylene can be diluted by LLDPE, or LDPE

    coupling agent for polyethylene based compounds

    W1L-1 as a compatibilizer for the adhesion between polyethylene and polar materials,polypropylene or polystyrene

  • EPDM-g-MAH

    Maleic anhydride functionalized EPDM rubber high elastic modulus fatigue resistance, aging resistance EPDM-g-MAH cold resistance super tough nylon toughening compatibilizer

    Nylon Modifier with High Elastic Modulus of Rubber and Ultra-Low Temperature Toughened PA

    A grafted polymer of maleic anhydride

    Nylon Reinforced Filling, Ultra-Low Temperature Toughening, Anti-Aging, Anti-Fatigue

    W1P-2 anhydride modified ethylene propylene diene monomer elastomer

    Ethylene Propylene Diene Monomer Grafted Maleic Anhydride Additives Used as Reinforced Filler for Nylon

  • SEBS-g-MAH

    Maleic anhydride SEBS compolymer keep high thermal stability and offer optimal dispersion good quality and temperature resistance aging resistance

    Styrene Ethylene Butylene Styrene Grafted Maleic Anhydride Compolymer for Engineering Plastics Toughening Compatible Agent

    W1X used as compatibilizer for asphalt modification

    SBS Modified asphalt compatibilizer

    W1G-F high flowaility toughner for PA,PPE;adhesion

    modified asphalt/bitumen polyolefin alloy compatibilizer

    Maleic Anhydride Grafted Polymer for Plastic Modification with Good Fluidity, Temperature Resistance and Aging Resistance

    W1G-F Styrene-Ethylene-Butylene-Styrene elastomer with good stability and aging resistance.

  • PPO-g-MAH

    Speacial formulated anhydride PPE used as a coupling agent provide excellent adhision properties and a compatibilizer for PA /PPE blends

    CS-1anhydride modified polyphenylene oxide.

• GMA graft

  • POE-g-GMA

    High Reactivity Low Residue Glycidyl Ester Grafted Polymer POE-g-GMA Plastic Alloy Flame Retardant Compatibilizer Toughener

    Polyolefin and polyester alloy compatibilizer PBT/PET reinforced filling low temperature toughening modified POE-g-GMA graft polymer

    A graft polymer containing glycidyl ester functional groups, olefin copolymer as a matrix material, high reactivity

    Polyester Polycarbon Material Reinforcement and Reinforcement Flame Retardant Compatibilizer and Toughening Agent Polyolefin Elastomer Grafted GMA

    a toughener/compatibilizer for polyester and the fire retardant filled polyester

    POE graft MAH PBT, PC, PET compatibilizer

    Polyolefin Elastomer Grafting Glycidyl Methacrylate Toughener of PC/PBT, PC/Pet and Other Alloy Materials

    Synthetic Resin Used as Modifier for PBT/Pet Enhanced Filling

    W5D Polyolefin Elastomer Grafting Glycidyl Mathacrylate Plastic Additives Used in ABS/PC, PBT/PC System

    Highly dispersed polyester compatibilizer (W5F)

    POE grafting GMA (W5A)

    A graft polymer containing glycidyl ester functional group

    An epoxy modified ethylene copolymer with high content of reactive groups

    A glycidyl methacrylate modified polyolefin elastomer

    W5A-2 glycidyl methacrylate modified polyolefin elastomer used as compatibilizer/toughener in PBT/PET and other polyester compounds

    W5AS Epoxy modified ethylene copolymer with high content of reactive groups.

• Functional additives

  • Degradable Products

    Improve the compatibility of polyester degradable materials, fully degradable MAH functional polyester elastomer

    GMA functionalized polyester elastomers increase tensile strength at break elongation Self-degradable material compatibilizer

    impact modifier /coupling agent/compatibilizer for PLA/PBAT

    Degradable material compatibilizer/chain extender BP-1

    General EVA Grafting Maleic Anhydride Products with Low Melting Point High Adhesive Performance

    Compatibilizer/chain extender for degradable materials

    Plastic Auxiliary Agent for Improving The Performance of Polyester Degradable Materials

    BP-3

    A glycidyl methacrylate modified Poly with high grafting rate

    BP-4 coupling agent used in biodegradable material like PLA/PBS

    BP-4 Polyester biodegradable material compatibilizers

  • Photovoltaic Encapsulation Film

    High transparency and low crystal point silane-modified olefin copolymer photovoltaic encapsulation film glass adhesive

    Plastic Auxiliary Agent for Glass Adhesive with High Transparency and Low Crystal Point

    PPH Y1500

  • Hot Melt Adhesive

    A general-purpose EVA-g-MAH low melting point used for film blowing, foundation,hot melt adhisive,solvent, dissolving glue,surface feeding agent excellent adhesion and permeability

    General-purpose EVA-g-MAH product

    K2D

    K2L used as the adhesion for mutil-layer structure materials

    A chemical modified high density polyethylene

    A kind of chemical functionalized propylene base copolymer

    K2D A chemical modified polyethylene

    K2L Composite hot melt adhesive, hydrolysis resistant, high adhesion

    K3A chemical functionalized propylene base copolymer withlow glass transition temperature.

    Adhesives for aluminium composite panels K2B

    K3A Ethylene propylene copolymer grafted maleic anhydride

    maleic anhydride grafted composte ethylene-vinyl acetate copolymer

  • Special Alloy Compatibilizer

    Transparent color particle containing epoxy group of styrene/butadiene copolymer and PBT/ABS polyester alloy compatibilizer

    Coace Special Alloy Series Products Used as Coupling Agent of ABS/PBT, ABS/PC

    A styrene-butadiene copolymer containing epoxy

    A chemical modified Acrylonitrile Styrene acrylate copolymer

  • Electret Masterbatch

    An electret master batch applied to PP meltblown cloth

    PP meltblown cloth electret masterbatch

    EM-1 electret masterbatch based on polypropylene

    For meltblown nonwovens PPH，Y1500

  • Styrene Alloy Compatibilizer

    A binary random copolymer resin reinforced with maleic anhydride and styrene copolymerized as a filler alloy compatibilizer

    copolymer modifier used as compatibilizer in PA/ABS and PC/ABS

    KS-03 used as compatibilizer/coupling agent for PC/ABS alloy,ABS/PET alloy,PA/ABS alloy,PA/ASA alloy

  • Polyester Alloy Compatibilizer

    Recycled nylon, polyester, polycarbonate chain extender PLA and PBAT alloy compatibilizer random styrene-acrylonitrile-glycidyl methacrylate terpolymer

    Coupling Agent for Random Styrene-Acrylonitrile-Glycidyl Methacrylate Terpolymer

    A kind of epoxy reactive compatibilizer having high content and equivalent of epoxy group

• Materials Database

  • Coace®ADC
  • Coace®B1
  • Coace®B1-1
  • Coace®B1-2
  • Coace® B1-3
  • Coace®B1A
  • Coace®B1C
  • Coace®B1F
  • Coace®B1R
  • Coace®B2
  • Coace®BDC
  • Coace®BP-1
  • Coace®BP-2
  • Coace®BP-3
  • Coace®BP-4
  • Coace®BP-5
  • Coace®CS-1
  • Coace®CS-2
  • Coace®EM-1
  • Coace®G1
  • Coace®K2B
  • Coace®K2C
  • Coace®K2D
  • Coace®K2G
  • Coace®K2L
  • Coace®K3A
  • Coace®K3B
  • Coace®KS-01
  • Coace®KS-03
  • Coace®KS-05
  • Coace®PPH,Y1500
  • Coace®R1020
  • Coace®R1030
  • Coace®R2121
  • Coace®RM1201T
  • Coace®W1
  • Coace®W1A
  • Coace®W1A-1
  • Coace®W1A-2
  • Coace®W1A-3
  • Coace®W1A-4
  • Coace®W1A-5
  • Coace®W1A-6
  • Coace®W1A-F
  • Coace®W1B
  • Coace®W1C
  • Coace®W1C-1
  • Coace®W1C-2
  • Coace®W1C-3
  • Coace®W1D
  • Coace®W1E
  • Coace®W1F
  • Coace®W1F-2
  • Coace®W1F-3
  • Coace®W1G
  • Coace®W1G-F
  • Coace®W1H
  • Coace®W1L
  • Coace®W1L-1
  • Coace®W1L-2
  • Coace®W1L-5
  • Coace®W1L-B
  • Coace®W1P
  • Coace®W1P-1
  • Coace®W1P-2
  • Coace®W1T
  • Coace®W5A
  • Coace®W5A-2
  • Coace®W5AD
  • Coace®W5AF
  • Coace®W5AS
  • Coace®W5B
  • Coace®W5D
  • Coace®W5F

Solutions by industry

• Compounding Additives

  • De-gradable Product
  • Hot-Melt adhesives
  • Special Alloy
  • Electret Master-batch
  • Photovoltaic packaging film additives

• Automotive

• Building And Construction

• Consuming Products

• Hygiene and Healthcare

News

• Company News

  • Take you into Coace
  • Coace :polymer composite best solution provider
  • In what form does the compatibilizer appear on the field?
  • Four ways to take you to understand the cut block
  • Grasp these two points for the screw combination
  • Nylon is toughened, why choose 40:1 for the length-to-diameter ratio of the extruder
  • "KS-01", PA/ABS gold medal mediator
  • Good news ▏COACE Chemical won the title of "Professional, Refined, Special,and New" SME in Fujian Province in 2022
  • Do a good job of nylon toughening, how to choose nylon
  • Polyolefin-grafted maleic anhydride as compatibilizer for lignin-polypropylene composites
  • The integration of industry and education, the torch enterprises of universities and colleges】Recorded Xiamen Torch University Hall leaders and their party visited COACE for guidance
  • CHINAPLAS 2023 Coace and you will meet in Shenzhen
  • Chinaplas 2023 ▏Coace on the move

• Industry News

  • Car with plastics
  • The principle and function of chainextender
  • Four points let you understand the conveyor block
  • How much do you know about modified plastics?
  • What are the ways to transform plastics?
  • Comprehensive Study on Modification of Plastic Blends
  • 10 points to pay attention to in nylon modification!
  • Eight aspects, let you master the key to elastomer toughened nylon!
  • PA modified plastics characteristics
  • Forming characteristics of modified plastic
  • The introduce of the plastic modifier specification
  • What are the modification technologies of plastic modifiers?
  • Production process - understanding screw components
  • Development Trend of Modified Plastics
  • Plastic toughening modification technology, just read this article
  • Modified Nylon, we need them to help
  • Preparation of maleic anhydride grafted polypropylene composite film
  • Energy consumption to be reduced by 50%, Mitsui Chemicals to build eco-friendly carbon fibre demonstration line
  • what is the strengthness of maleic anhydride grafted polymer?
  • TPE helps to rapidly develop battery management systems
  • What is the PA Reinforced Filling Ultra-Low Temperature Toughening High Grafting Rate POE-G-MAH Compatible Toughening Agent
  • What is Copolymer Modifier Used as Compatibilizer in PA
  • What is Ultra-low Temperature Tougheners
  • What is PP/PE Grafting Maleic Anhydride Resin Modifier ?
  • How to choose additives?
  • POE-g-MAH: Revolutionizing Product Applications with Multifunctionality and Durability
  • PP-g-MAH: Unleashing the Power of Polypropylene with Enhanced Performance
  • Unlocking the Potential of PE-g-MAH: Enhancing Applications Across Industries
  • Expanding Possibilities: The Versatile Applications of PE-g-MAH
  • Development status of modified plastics in the automotive industry
  • What Particular Uses Do Modified Materials Have in Automobiles?
  • What is POE-g-MAH and How Does it Revolutionize the Automotive Industry?
  • There are many POE-g-MAH manufacturers, and there is a lot of room for future market development
  • What Are the Advantages and Applications of Modified Materials in the Construction Industry?
  • What Is Electret Masterbatch Based on Polypropylene and How Does It Work?
  • What are the advantages and applications of Photovoltaic Packaging Film Additives?
  • What are the advantages and applications of impact modifiers for flame-retardant PA6PA66 compounds?
  • [Auxiliary series] maleic anhydride graft compatibilizer
  • What is the technology of Polypropylene Toughening Modification in Automotive Industry?
  • How do coupling agents and compatibilizers affect the properties of continuous fiber-reinforced polypropylene?
  • How to improve the compatibility of polypropylene with other polymers? See here for several methods!
  • Polypropylene grafted maleic anhydride to compatibilize polyurethane/polypropylene composite system
  • Get twice the result with half the effort! Use of recycled plastic compatibilizers
  • Introduction of compatibilizer and its working principle
  • What Makes EPDM-g-MAH the Optimal Choice for High Voltage Cables?
  • Toughening mechanism of POE-g-MAH to glass fiber reinforced high temperature nylon!
  • The use of POE elastomer
  • Photovoltaic adhesive film material POE products and application status
  • Compatibilizer——Bridge for the modification of biodegradable materials
  • How are graft compatibilizers used in hot melt adhesives for shoes?
  • Application of SEBS to improve PP impact resistance
  • Correct use of compatibilizer
  • What are the 7 categories of compatibilizers
  • Comparison of POE and EPDM
  • How to apply EMA GMA toughening compatibilizer
  • Do you know what is modified by plastic modification?
  • Do you know the difference between coupling agent, crosslinking agent and compatibilizer?
  • Application of POE Polyolefin Elastomer in Photovoltaic Field
  • Understand POE in one article
  • How to improve the dimensional stability of automotive polypropylene materials?
  • Four application trends of modified PP in the home appliance industry
  • How SEBS-GAH is applied to plastic modification and compatibilization
  • How SEBS grafted maleic anhydride is applied in the medical industry？
  • Key points of the method of polymer grafting modification technology
  • Mechanism of plastic toughness and analysis of commonly used toughening agents
  • Advantages of Maleic Anhydride Grafting
  • Accounted for 46%! Why modified PP is so popular in the field of automotive modified plastics
  • The purpose of plastic blending compatibilization and blending modification
  • An article to understand the toughening modification and reinforcement modification of polymer materials
  • The difference between maleic anhydride and glycidyl methacrylate crosslinking technology
  • For the toughening technology of modified plastics, it is enough to read this article
  • Compatibility of polymers and compatibilizers
  • What is alloy compatible toughener？
  • Common modification methods and applications of PE materials
  • A new artifact used in the modification of waste plastics
  • Principle and characteristics of maleic anhydride graft
  • What are the methods of plastic toughening modification?
  • Introduction to the classification of engineering plastic tougheners
  • How much do you know about the six commonly used plastic additives?
  • The Birth of Modified Polypropylene Plastics: About the Application of Toughener​
  • EVA or POE, how to choose the encapsulation film for photovoltaic double-glass modules?
  • What kinds of common modified nylons are there? Do you know the improved properties?
  • A list of common plastics, engineering plastics and special plastics such as PP, PA, POM commonly used in automobiles!
  • How is toughening agent applied to PP modification
  • Properties and uses of modified nylon PA6/66
  • Effects of Different Structure Elastomers on the Toughening Properties of Nylon
  • An article explaining the principle of nylon toughening
  • Mechanism of toughening agent
  • 6 basic knowledge you need to know about glass fiber reinforced nylon
  • What is the normal shrinkage rate of modified reinforced pp material？
  • How to Choose the Compatibilizer of PA and PP Alloy？
  • How to improve the compatibility of polymer blend system?
  • Discussion on issues related to plastic compatibilizers
  • Who should be picked for EVA vs POE photovoltaic encapsulation film?
  • New Application of Modified Polypropylene (PP) Plastics in Household Appliance Industry
  • Flame retardant PP related knowledge
  • Key points for the selection of modified plastic additives
  • A brief introduction to the toughening mechanism of toughening agents
  • The difference between coupling agent, crosslinking agent and compatibilizer in use
  • The modification of general-purpose plastics by POE is summarized here! ​
  • How to Solve Bubbles in Modified Nylon Injection Moulding？
  • How to Control the Extrusion Temperature of Nylon Double 6 Compounding Single 6 Plus Fiber？
  • What are the main characteristics of glass fiber reinforced nylon PA plastics?
  • Modified PP, POE Polyolefin Elastomer Better than EPDM?
  • How to Apply Flame Retardant PP Material in Packaging Field
  • Why Reinforced Nylon with High Percentage of Toughening Agent is Easy to Break the Strip?
  • HOW to Solve Bubbles in Modified Nylon Injection Moulding
  • Polypropylene Toughening Modification by Blending: A Comprehensive Overview
  • How to Reduce the Water Absorption of Nylon?
  • A leading manufacturer of polymer compatibilizers—Coace Chemical Nylon Toughening Solutions
  • Where do you need a compatibilizer
  • How to choose a compatibilizer?
  • Why Reinforced Nylon with High Percentage of Toughening Agent is Easy to Break the Strip?
  • Key points of the method of polymer grafting modification technology
  • PA, PPO and SEBS are blended to improve their toughness and expand the application of alloy materials
  • Application of compatibilizer in plastic recycling
  • Common PBT material modification and application
  • What is the application principle of compatibilizer in ABS fiber ?
  • What is the Difference between the Characteristics of Modified PP Materials and ABS?
  • How to Define if the Plastic Modification Process is Good or Bad？
  • Is the shrinkage of polypropylene difficult to control? It turns out that these 5 major factors are at work!
  • Why are flame retardant PP particles used for the socket housing material?
  • How to choose toughening agent for PP fireproof modification?
  • Matters needing attention in ABS plastic modification
  • Do PC Flame Retardants Affect Dimensions?
  • If you want to fully understand masterbatch, you must remember these 4 key points! ​
  • What properties change when fiber reinforcement is added?
  • A comprehensive understanding of the process, performance, modification and application of PA6
  • One article to understand 11 solutions for PP toughening
  • How to judge the compatibility between polymers? 8 ways to tell you
  • Key Technology of Modification of Engineering Plastics
  • How does plastic modification achieve flame retardancy?
  • Plastic modification, the choice of additives should pay attention to these six points
  • anti-oxidation! The aging of modified polypropylene (PP) needs to be solved!
  • Why do flame retardants have precipitation problems? How to deal with it?
  • What Are Reinforced Nylon and Toughened Nylon?
  • Modifiers often say modified plastics, what properties have been changed?
  • Application of five major engineering plastics in the automotive field
  • The solution to the poor heat resistance of ABS plastic
  • How to set the mold and barrel temperature of modified nylon (PA)?
  • How to choose fillers or additives for flame-retardant PP of different flame-retardant systems?

• Exhibition News

  • The exhibition in 2019
  • 2023 CHINAPL AS International Rubber and Plastic Exhibition Preview

Science Knowledge

• Plastic substitution through modification

• The three "essences" of plastic modification

• Degradable compatibilizer

• Ethylene Propylene Diene Monomer grafting aid

• ​The importance of and reasons for choosing a good nylon material

• What monomers are polymerized to form PBT ?

• How to choose the compatibility of PBT modification?

• How to Achieve Nylon Toughening -POE-g-MAH

• The years are kind to those who wish to do so

• Compatibility agent for nylon and glass fibre

• Highly filled nylon modification, this compatibilizer is for you

• How to improve the chemical resistance of PC？

• How to choose nylon?

• The plastic modifier about W1A specification

• plastic products are prone to brittle fracture.

• Why is the grafting rate of POE grafted maleic anhydride controlled at 0.6-1.0

• Lecture 11 Screw combination

• How to make good use of nylon secondary materials?

• How to improve the scratch resistance of PE in cable materials

• How to solve bubbles in modified nylon injection moulding

• How many nylon manufacturers are there in China？

• Awareness of one smoke five halogen flame retardant cable material

• Coace chemical plastic modifier W1L for sale

• How to chooose toughening agent

• Why reinforced nylon with high percentage of toughening agent is easy to break the strip?

• W5A Polyester material compatibilizer

• Customer Q&A 15/How to choose PBT raw materials for PBT modification

• Aluminum flake bonding aid

• Could PBT be used in what items ?

• A chemically functionalized polypropylene with high content of MAH

• Is Toughened Nylon microscopically compatible?

• Nylon high filling modification

• Coace Chemical introduce new material about the Toughening of nylon for reference.

• plastic impact modifer of the machine

• SEBS grafted maleic anhydide，Coace W1G

• The causes of mold fouling in injection molding are analyzed

• Nylon and glass fiber reinfored modifier

• What are the requirements of Dean Wu's PBT modification for the twin-screw machine?

• What are the requirements for the process of PPT modification?

• When choosing a toughening agent, these three points can be referred to

• Do you know what additives are used for TPE and TPR？

• W1L Compatibilizer for Steal-Mesh Skeleton Plastic Composite Pipe

• Professional Impact modifier SEBS -W1G. for recommand

• How to control the cost of modified additives

• How the POE-g-GMA can tougher the PBT ?

• What if different polymers are incompatible?

• W1A and W1B resin modifier for Super-Tough or Cold-Resistant Nylon.

• How PBT plus fiber improves floating fiber

• What should pay attention to when making PBT/PC alloys

• What is nylon modification?

• How to choose toughening agent for nylon super tough and cold resistant materials

• Lecture 7 How to make good use of nylon secondary materials

• How to understand plastic alloys？

• How to improve the quality of PBT primary water outlet？

• How many PBT manufactures are there in China ?

• Hot melt adhesive series.

• The causes of agglomeration during modification.

• How to reduce the water absorption of nylon

• What temperature is suitable for PBT modifier ?

• R1020 / Photovoltaic adhesive film grafted functional additives.

• Customer 16 Q&A/How to choose flame retardant for PBT flame retarda

• Causes of continuous granulation in plastic modification

• PP modified compatibilizer ultra high fluidity

• How to reduce the effect of titanium dioxide on the performance of blackout materials？

• Insulation strip toughening pursuit of cost-effective how to choose toughening agent

• The difference between PV grade POE and general grade

• Is it possible to add toughening agents to ABS toughening in addition to high gum powder?

• PP Compatibilizer for improved drawing and punching performance

• Reasons for the appearance of black spots on particles

• The standard of qualified adhesive film

• Advantages and disadvantages of EVA and POE films

• plastic impact modifer of the machine

• W5A - A Polyester material compatibilizer

• Industry Rat-racing, COACE pursues high performance-price ratio.

• B1A- a chemically functionalized polypropylene with high content of MAH

• New material from COACE CHEMICAL. the plastic modifier about W1A specification introduce

• Which products are suitable for PBT modification?

• Low-odour compatibilizer

• Understand low temperature resistant nylon in these three cases

• What processing temperature is suitable for PBT modification？

• Customer consultation 32 /How to control black spots

• KS-01 ABS with glass fibre compatibilizer

• Cross-linked and non-cross-linked films

• POE Grafted Toughener Additives Low Temperature Resistance

• What is the right temperature control for nylon pelletizing?

• Welcome the new group of friends to the COACE family!

• What happens when you add too much toughening agent?

• Adding silane monomer in addition to grafting masterbatch for adhesive film

• Do PC flame retardants affect dimensions?

• Interviews with engineering staff

• How to choose an ABS plus glass fibre compatibilizer？

• Nylon Toughener POE graft vs SEBS graft

• Application of grafted silane masterbatches in photovoltaic panels

• PPO and PA alloy compatibilizer

• Understand low temperature resistant nylon in these three situations

• How to understand no-paint plastic？

• Cost-effective in the compatibility agent industry

• How to test the service life of adhesive film

• How to solve the problem of warpge of nylon reinforced fiber plane

• How to solve the reinforced nylon thin and thick transition at the production of depression？

• Behind every artisanal enterprise is a group of dedicated people who love their work

• Nylon to improve the tensile strength

• How to solve the fogging phenomenon of finished black nylon？

• How to increase the toughness of nylon

• How to solve PP with 40% calcium carbonate over 100 mesh vacuum port easy to bubble material

• Coace Chemical - Internship series: Xiao Mi

• What is the grafting rate of nylon tougheners

• Application of grafted silanes in POE adhesive films

• How to make good nylon fibre reinforcement？

• Toughening agents in the automotive industry

• Exploring the classification of PC flame retardants

• How can we avoid the occurrence of continuous grains?

• Engineering Department - Interview with Factory Manager

• Nowadays these biodegradable materials are already available everywhere

• R1020 - Photovoltaic film grafting masterbatch

• How to choose PA and PPO alloy compatibilizer

• Daily work of Dean Wu

• How should you choose this alloy compatibilizer for PP and PA.

• What are the indicators of plastic toughness?

• How to control the extrusion temperature of nylon double 6 compounding single 6 plus fiber

• Do Compatibilizers/Tougheners meet FDA testing?

• Storage & Transportation Department - Uncle Ma

• What to do when plastic products are prone to brittle fracture？

• How to solve the problem of floating fibres in reinforced nylon？

• How to reduce plastic odours

Contact