IS A binary random copolymer resin reinforced with maleic anhydride and styrene copolymerized as a filler alloy compatibilizer
|Test item||Test data||Test method|
|density||1.15 g/cm³||ASTM D792|
|Melt flow rate (190°C/2.16kg)||4.5-7.5g/10min||ASTM D1238|
|Maleic anhydride content||16-20wt%||COACE Method 1|
|moisture||≤0.5 %||Halogen Rapid Moisture Determination|
KS-01 is a polymer of styrene and maleic anhydride. Because it is a compatibilizer obtained by polymerization, its maleic anhydride content is relatively high, and it can be used as a compatibilizer for AS, ABS and other materials.
|Lzod notched impact strength(23℃）||J/m||90||110|
|performance||unit||PBT/ABS(4:6)14% high glue powder||PBT/ABS(4:6)14% high glue powder/5% KS-01|
|Lzod notched impact strength(23℃）||J/m||55||70|
|Lzod notched impact strength(23℃）||J/m||45||70|
Note:The data above are all experiment typical values, only for reference.
Suggested dose:The dose (1-8%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.
Packaging, storage and transportation:20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.
This product is styrene and MAH copolymer, which is especally suitable for molfledcompatibilizer of AS, ABS and other materials.
It can be used as compatibilizer for AS/GF or ABS/GF reinforced composite.
It can be used as comatibilizer for inflaming retarding, fling and reinforcing of ABS or AS.it can be used as compatibilizer for ABS/PMMA, AS/PMMA and other alloy materials.
KS-01 is a polymer of styrene and maleic anhydride.View More
Coace® KS-03 is a styrene-acrylonitrile-maleic anhydride copolymer.View More