Recycled nylon, polyester, polycarbonate chain extender PLA and PBAT alloy compatibilizer random styrene-acrylonitrile-glycidyl methacrylate terpolymer

This product is a kind of epoxy reactive compatibilizer having high content and equivalent of epoxy group. It features high reactivity and obvious compatibiling and end capping effect, and is able to improve the thermal stability, anti-hydrolytic stability and mechanical performance. It is suitable for PC/ABS, PC/ASA, R-PC/ABS and other alloy materials having low gloss requirements.

Table 1: Typical Data of toughening of PC/ABS

Table 2: Typical Data of PC/PBT

Note:The data above are all experiment typical values, only for reference.

Suggested dose:The dose (3-1096) may be increased or decreased properly according to the
toughness requirements and by taking the cost into consideration.

Packaging, storage and transportation:25 kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and
sunlight and rain shall be avoided.

KS- 05 contains epoxy group equivalent of high density, which may have strong reaction with polyester.containing active group and having high density of active end group, S0 as to realize efficient endcapping and improve the thermal stability and anti-hydrolytic stability,Meanwhile, the epoxy group equivalent of high density may realize chain extension and crosslinking and have delustering effect on the polyester materials.