All Categories

Home > Products > MAH graft > POE-g-MAH

W1 ethylene elastomer with functionalized maleic anhydride, which is especially suitable for super-tough or cold-resistant nylon

6
2
4
3
5
1
6
2
4
3
5
1
Model No.: W1
lntroduction:

Is ethylene elastomer with functionalized maleic anhydride, which is especially suitable for super-tough or cold-resistant nylon.


  • Description
  • Characteristic
  • Applications
  • Q& A
  • Related Product
  • Inquiry
Description

POE-g-MAH Series are maleic anhydride functionalized polyolefin elastomers, mainly used in PA modification. Poe-g-mah and nylon have good reactivity, can be evenly dispersed in nylon, forming an island structure, play the role of increasing toughness, and its low glass transition temperature, nylon also has a good performance on ultra-low temperature increasing temperature

W1-1

Chemical description:Nonionic surfactant complexes

Typical application

1.Used for nylon. Processing, reduce water absorption
2.Used for Used as compatibilizer for nylon, polypropylene and polyethylene mixed alloy
3.UeseUsed for PA6/PA66 compatibility, toughening, etc. Improve the impact resistance of for nylon macromolecular modifier (coupling agent) for mineral and glass fiber filling

Brand numberMelt index190℃ 2.16kgg/minGrafting ratioDensityg/cm²Characteristic
W1A0.3-1.0High0.87PA Reinforced filling, ultra-low temperature toughening· ·
W1A-20.3-1.0High0.87PA Reinforced filling, ultra-low temperature toughening
W1A-40.1-1.0High0.87PA Reinforced filling, ultra-low temperature toughening
W1A-6>0.1High0.89PA Reinforced filling, low temperature toughening
W1A-F5-14High0.87PA Reinforced filling,TPE coated rubber
W1B0.3-2.0High0.87PA Reinforced filling, ultra-low temperature toughening
W10.2-1.0High0.88PA Reinforced filling, low temperature toughening
W1C0.3-1.5Medium0.88PA Reinforced filling, low temperature toughening
W1D0.6-2.0High0.88PA Reinforced filling, low temperature toughening
W1F10-24High0.87PA PA enhanced filling, high dispersion

Note:The above data are typical values tested and should not be construed as specifications
Low < 0.4 wt %, Medium 0.4 - 0.8 wt %, High > 0.8 wt %


Features/characteristicThis product is ethylene elastomer with functionalized maleic anhydride, which is especially suitable for super-tough or cold-resistant nylon.

Suggested dose:The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.

Packaging, storage and transportation:20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.

Characterisitic

Appearance, 25℃: Light yellow or off-white powder or pellets.
Solubility: Insoluble in water, soluble in ethanol, chloroform and other organic solvents.

Applications

POE-g-MAH W1 is an internal antistatic agent widely used to polyolefin plastics such as PE, PP containers, drums (bags),(boxes), polypropylene spinning, non-woven fabrics. This product has good heat resistance, anti-static effect durable and efficient.
POE-g-MAH W1 can be added into plastic products directly, and can also be prepared to antistatic masterbatch to combine with blank resin can get a better effect and homogeneity.

W1-3

Customer Questions & Answers
    Did not match any questions!
RELATED PRODUCT

INQUIRY