W1F is a maleic anhydride grafted polymer with a propylene elastomer copolymer as the matrix material, with very low glass transition temperature properties, high flow properties and a white translucent particle appearance.
|Melt flow rate (190°C/2.16kg)
|Maleic anhydride content
|Colebond Method 1
|Halogen Rapid Moisture Determination
|1/16vertical flame retardant
|Izod notched impact strength
Suggested dose: The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.
Packaging, storage and transportation:20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.
W1F is a maleic anhydride functionalized polyolefin elastomer with high
flow properties that promote glass fiber dispersion and reduce MI
1. Be used for PA6 or PA66 compatibilizing or toughening. Increase the impact resistance and processability of nylon,decrease the water absorption,greatly improve the cold-resistance.
2. Be used for the compatibilizer of nylon and polypropylene/polyethylene alloy.
Be used for the macromolecular modifier(couling agent)of mineral-filled or grass-flber-filled nylon.
W1B is ethylene elastomer with functionalized maleic anhydride which is especially suitable for super-tough or cold-resistant nylon.View More
Modifier for Increasing The Impact Resistance and Processability of NylonView More
Coace® W1C-2 is a maleic anhydride polyolefin with special formula treatment.View More