W1A-2 is a grafted polymer of maleic anhydride, with polyolefin elastomer as the base material, with extremely low glass transition temperature characteristics and white and transparent particle appearance.
| Performance | Numerical value | Testing method |
| Density | 0.87 g/cm³ | ASTM D792 |
| Melt flow rate (190°C/2.16kg) | 0.3-1.0 g/10min | ASTM D1238 |
| Maleic anhydride content | High | Colebond Method1 |
| Moisture | ≤0.3 % | Halogen Rapid Moisture Determination |
| Typical application | Polyolefin Alloy CompatibilizerPA reinforced filling, ultra-low temperature toughening PA | |
| Performance | Numerical value | Testing method |
| Density | 0.87 g/cm³ | ASTM D792 |
| Melt flow rate (190°C/2.16kg) | 0.3-1.0 g/10min | ASTM D1238 |
| Maleic anhydride content | High | Colebond Method1 |
| Moisture | ≤0.3 % | Halogen Rapid Moisture Determination |
| Typical application | Polyolefin Alloy CompatibilizerPA reinforced filling, ultra-low temperature toughening PA | |
NOTE:The above data are typical test values and should not be interpreted as a specification low < 0.4wt %, medium 0.4-0.8 wt%, high > 0.8wt%
Pakaging and storage:
20KG kraft paper bag with internal plastic bag, This product shall be treated as non-hazardous article and be stored or transported under dry conditions, avoid sunlight and rain.
The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.
W1A-2 is ethylene elastomer with functionalized maleic anhydride,which is especially suitable for super-tough or cold-resistant nylon.
Be used for PA6 or PA66 compatibilizing or toughening. Increase the
impact resistance and processability of nylon,decrease the water
absorption,greatly improve the cold-resistance.
Be used for the compatibilizer of nylon and polypropylene/polyethylene alloy.
Be used for the macromolecular modifier(couling agent)of mineral-filled or grass-flber-filled nylon.
W1B is ethylene elastomer with functionalized maleic anhydride which is especially suitable for super-tough or cold-resistant nylon.
View More
W1A-2 is a grafted polymer of MAH, with polyolefin elastomer as the base material, with extremely low glass transition temperature characteristics and white and transparent particle appearance.
View More
Coace® W1T is an anhydride modified ethylene-acrylate copolymer with high grafting rate and low residue.
View MoreCoace Chemical Company Limited
Address: Room 307, No. 55, Hu'an Road, Huli District, Xiamen City
TEL: +8618559235532
Email: [email protected]
Coace Chemical Company Limited
Colebond (xiamen) New Materials Co,.Ltd
EN 
AR
FR
DE
HI
IT
JA
KO
PT
RO
RU
ES
TL
IW
ID
UK
VI
TH
TR
MS
BE
UR
BN
EO
LA
PA
