High Reactivity Low Residue Glycidyl Ester Grafted Polymer POE-g-GMA Plastic Alloy Flame Retardant Compatibilizer Toughener

This product is polyolefin elastomer grafted with glycidyl mathacrylate , which is especially suitable for the compatibilizer and toughener of polyester or polycarbonate materials.W5A polyester compatibilizer is based on POE by introducing strong polar reactive group GMA (glycidyl methacrylate), The material has high polarity and reactivity, can be used for flame retardant, reinforcement, toughening, filling, etc. Polyester material modification, can effectively improve the compatibility of composite materials and dispersion of fillers, improve product performance. It can also be used as an alloy compatibilizer for ABS / PC, PBT / PC, etc.

Table1: Typical Data of Reinforcing And Toughening of PBT.

Table2: Typical Data of Reinforcing And Inflaming Retarding of PBT.

Table3: Typical Data of PC/PBT.

Note:The data above are all experimental typical values, only for reference .

Table4: Performance comparison of W5A and imported Polyester toughening agent in PBT.

Note:PBT TAIWAN CHANGCHUN 1100-211M
From above date we know that the super-toughening effect achieved by adding this product in the PBT toughening system is close to that of imported polyester toughening agents.

Suggested dose:The dose (3-10%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.

Packaging, storage and transportation:20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.

This product is polyolefin elastomer grafted with glycidyl mathacrylate , which is especially suitable for the compatibilizer and toughener of polyester or polycarbonate materials.