Coace® W1P-2 is an anhydride modified ethylene propylene diene monomer elastomer. It is a modified elastomer with good performance on anti-fatigue and aging resistance.
Coace® W1P-2 is an anhydride modified ethylene propylene diene monomer elastomer. It is a modified elastomer with good performance on anti-fatigue and aging resistance.
One approach to improve anti-fatigue properties is to add reinforcing fillers such as carbon black, silica, or clay to the elastomer. These fillers improve the stiffness and strength of the material, reducing the deformation caused by cyclic loading, which can lead to cracking and failure over time. Crosslinking agents such as peroxides or sulfur can also be added to the elastomer to improve its resistance to fatigue.
To improve aging resistance, stabilizers and antioxidants can be incorporated into the elastomer formulation. These additives help prevent degradation of the material due to exposure to heat, UV light, and oxygen, which can cause the elastomer to become brittle and lose its mechanical properties over time.
Other methods to improve the performance of elastomers include using novel polymer chemistries and processing techniques, such as reactive extrusion or injection molding. These methods can produce elastomers with unique properties, such as high strength, toughness, or flexibility, while also improving their resistance to fatigue and aging.
Coace® W1P-2 is an anhydride modified ethylene propylene diene monomer elastomer. It is a modified elastomer with good performance on anti-fatigue and aging resistance.
Modified elastomers with good performance on anti-fatigue and aging resistance can be achieved through a variety of methods, including the incorporation of reinforcing fillers, crosslinking agents, and other additives.Characteristics | Value | Unit | Test Method |
Appearance | Granules | ||
Color | White or light yellow | ||
Density | 0.87 | g/cm3 | ASTM D792 |
Melt Flow Rate(190℃2.16kg) | 0.1-0.6 | g/10min | ASTM D1238 |
Maleic Anhydride Content | High | wt% | COACE Method[1] |
Notes [1] LOW<0.4wt%; Middle(0.4wt%-0.8wt%); High≥0.8wt%.
To be used as impact modifiers for PA6, PA66, and polyamide base fire retardant compounds masterbatch.
To be used as compatibilizers to improve the compatibility between polyamide and polypropylene, or polyethylene.
W1P is ethylene-propylen-diene monomer with functionalized maleic anhydride,which is especially suitable for super-tough or cold-resistant nylon.
View MoreThis produce is ethylene-propylen-diene monomer with functionalized maleic anhydride,which is especially suitable for super-tough or cold-resistant nylon.
View MoreW1P is a grafted polymer of maleic anhydride, and EPDM rubber is used as a collective material. It is mainly used in nylon modification.
View MoreCoace® W1P-1 is an anhydride modified ethylene propylene diene monomer with high elastic modulus of rubber, fatigue resistance and aging resistance.
View MoreCoace Chemical Company Limited
Colebond (xiamen) New Materials Co,.Ltd