All Categories

Home > Products > MAH graft > EPDM-g-MAH

Nylon Reinforced Filling, Ultra-Low Temperature Toughening, Anti-Aging, Anti-Fatigue

1
2
3
4
5
1
2
3
4
5
Model No.: W1P-1
lntroduction:

Coace® W1P-1 is an anhydride modified ethylene propylene diene monomer with high elastic modulus of rubber, fatigue resistance and aging resistance.


Coace® W1P-1 is an anhydride modified ethylene propylene diene monomer with high elastic modulus of rubber, fatigue resistance and aging resistance.

The anhydride modification of Coace® W1P-1 improves its elastic modulus, which means that it is more resistant to deformation under stress. It also improves its fatigue resistance, which means that it can withstand repeated stress cycles without breaking down. In addition, the anhydride modification improves the aging resistance of the material, meaning that it can maintain its properties over a longer period of time when exposed to environmental factors such as heat, sunlight, and oxygen.

Coace® W1P-1 is commonly used in applications that require a high level of durability and resistance to environmental factors, such as automotive seals, gaskets, and hoses, as well as in construction materials such as roofing membranes and waterproofing systems.


  • Description
  • Characteristic
  • Applications
  • Q& A
  • Related Product
  • Inquiry
Description

Coace® W1P-1 is an anhydride modified ethylene propylene diene monomer with high elastic modulus of rubber, fatigue resistance and aging resistance.

Coace® W1P-1 is a type of rubber material that has been modified with anhydride to improve its properties. Specifically, it is made from ethylene propylene diene monomer (EPDM), a synthetic rubber that is known for its excellent resistance to weathering, ozone, and UV radiation.



Characterisitic
Characteristics
Value
Unit
Test Method
AppearanceGranules

Color
Light yellow or white


Density
0.87
g/cm3
ASTM D792
Melt Flow Rate(190℃10kg)
0.2-1.0
g/10min
ASTM D1238
Maleic Anhydride Content
Middle
wt%
COACE Method[1]

Notes[1] LOW<0.4wt%; Middle(0.4wt%-0.8wt%); High≥0.8wt%.

Applications

To be used as impact modifiers for PA6, PA66, and polyamide base fire retardant compounds masterbatch.

To be used as compatibilizers to improve the compatibility between polyamide and polypropylene, or polyethylene.


Customer Questions & Answers
    Did not match any questions!
RELATED PRODUCT

INQUIRY