All Categories

Home > Products > MAH graft > EPDM-g-MAH

Maleic anhydride functionalized EPDM rubber high elastic modulus fatigue resistance, aging resistance EPDM-g-MAH cold resistance super tough nylon toughening compatibilizer

aging resistance EPDM-g-MAH
super tough nylon toughening compatibilizer
 EPDM-g-MAH compatibilizer
EPDM-g-MAH nylon toughening
Maleic anhydride functionalized compatibilizer
aging resistance EPDM-g-MAH
super tough nylon toughening compatibilizer
 EPDM-g-MAH compatibilizer
EPDM-g-MAH nylon toughening
Maleic anhydride functionalized compatibilizer
Model No.: W1P
lntroduction:

W1P is ethylene-propylen-diene monomer with functionalized maleic anhydride,which is especially suitable for super-tough or cold-resistant nylon.


Test itemTest dataTest method
density0.87 g/cm³ASTM D792  ISO 1183
Melt index0.1-0.4(190℃,2.16kg)g/10minASTM D1238  ISO 1133
GraftingHighrateacid-base titration

Note:The data is derived from the average value of product retention sample testing within six months, and this data is updated every six months. Grafting rate standard: low<0.4%; medium 0.4%-0.8%; high ≥0.8%

  • Description
  • Characteristic
  • Applications
  • Q& A
  • Related Product
  • Inquiry
Description
Table1: Typical Data of Toughening of PA6 Resin
PerformanceUnitPA6PA6+15%W1PPA6+20%W1P
Tensile strengthMPa605550
Flexural strengthMPa908070
Lzod notched impact strength (23℃)J/m807001000
Table2: Typical Data of Toughening of PA66 Resin
PerformanceUnitPA66PA66+15%W1PPA66+20%W1P
Tensile strengthMPa755755
Flexural strengthMPa1028580
Lzod notched impact strength (23℃)J/m808001000


Suggested dose: The dose (5-25%) may be increased or decreased properly according to the toughness requirements and by taking the cost into consideration.3-10% shall be adopted for PA6/PA66 reinforcing and toughening, while 5% shall be adopted for the compatibilizer of nylon and polypropylene/polyethylene alloy.

Packaging, storage and transportation:20kg kraft bag with internal plastic bag. This product shall be treated as non-hazardous article and be stored or transported under dry conditions, and sunlight and rain shall be avoided.

Characterisitic

This produce is ethylene-propylen-diene monomer with functionalized maleic anhydride,which is especially suitable for super-tough or cold-resistant nylon.

Applications

W1P can be used for PA6 PA66 or PP super-tough.Increase the ultra-cold impact resistance and processability of material , decrease the water absorption,and greatly improve the cold resistance.
It can be used for the compatibilizer of nylon and polypropylene alloy.

1

Customer Questions & Answers
    Did not match any questions!
RELATED PRODUCT

INQUIRY

Hot categories