The charge stored in EM-1 can be the unipolar real charge (space charge) injected from the outside, or the dipole charge formed by the orderly orientation of dipoles in the polar dielectric, or both types of charges at the same time.
EM-1 can increase the ability of electrostatic adsorption and negative ion sterilization of the mask to effectively block droplets, dust, viruses, etc. below microns. At the same time, under the same fiber fineness and gram weight, the resistance of non-woven products can be reduced, and the filtration efficiency of non-woven products can be improved at the same time.
The charged melt-blown cloth can more effectively filter the Staphylococcus aureus bacterial aerosol in the droplets. Therefore, to meet the bacterial filtration efficiency greater than 95% and meet the respiratory resistance not exceeding 49Pa, it is necessary to use an electrostatic melt-blown cloth. At the same time, it can reduce the resistance of non-woven products under the same fiber fineness and gram weight.
EM-1 is a kind of electret masterbatch applied to PP melt-blown cloth. It can effectively absorb the free charge generated during electret, and maintain the charge ability after electret treatment for a long time.
One of the key benefits of using EM-1 electret masterbatch in PP melt-blown cloth production is its ability to absorb the free charge generated during the electret treatment process. This helps to maintain the charge ability of the material for a longer period of time, which can improve its filtration efficiency and performance over time. By maintaining the charge ability of the material, EM-1 can help to ensure that the PP melt-blown cloth remains effective in capturing and filtering out small particles and pollutants, even after repeated use or exposure to various environmental conditions.| Characteristics | Value | Unit | Test Method |
| Appearance | Pellets | ||
| Color | White translucent | ||
| Density | 0.92 | g/cm3 | ASTM D792 |
| Melt Flow Rate（230℃2.16kg） | 1400±200 | g/10min | ASTM D1238 |
| Melting Point(DSC) | 165 | °C | ASTM D3418 |
To improve the charge retention rate, lower decay value and prolong charge retentionperiod.
To improve the filtration efficiency of melt-blown non-woven fabric.
EM-1 is an electret master batch applied to PP meltblown cloth.
View MoreCoace Chemical Company Limited
Colebond (xiamen) New Materials Co,.Ltd
Address: Room 307, No. 55, Hu'an Road, Huli District, Xiamen City
TEL: +8618559235532 / +8618604856871
Email: [email protected]
Coace Chemical Company Limited
Colebond (xiamen) New Materials Co,.Ltd
EN 
AR
FR
DE
HI
IT
JA
KO
PT
RO
RU
ES
TL
IW
ID
UK
VI
TH
TR
MS
BE
UR
BN
EO
LA
PA
